Baby Lock Capella Instruction And Reference Manual page 68

g Pass the thread along the slot to pass it through the
thread take-up lever hole from the right side.
1 Thread take-up lever
h Draw the thread down through the slot, and then
through the hole in lower thread guide.
1 Hole in lower thread guide
66
Use the included needle changing tool (threader) 1 to
i
pass the thread into the needle bar thread guide 2.
1 Needle changing tool (Threader)
2 Needle bar thread guide
Memo
• Up to four thread spools can be prepared on a
spool stand for the next color change. By hooking
the thread on the thread cutter/holder, the thread
can be smoothly replaced with that of the next
color.
1 Thread cutter/holders
2 Spool stand