Table of Contents
Advertisement
The Embroidery Frame Holder is ready for the
embroidery frame to be attached.
c
Hold the embroidery frame level, and then
simultaneously align both the left and right mounts
with the Embroidery Frame Holder clips.
• The inner frame should be on top.
d
Insert the embroidery frame until it snaps into place.
1 Make sure that the pins on the left and right arms of the
Embroidery Frame Holder fit into the positioning slot and
hole on the embroidery frame.
Correctly using the embroidery frames
The various types of embroidery frames and their uses are
described below.
In addition to the included embroidery frames, there are many
frames that can be used with this machine.
CAUTION
• Only use embroidery frames of the sizes
indicated in the screen, otherwise the
embroidery frame may hit the presser foot,
which may result in injuries.
When difficult to replace the embroidery
frame
Depending on the situation at the end of stitching, it may
be difficult to replace the embroidery frame. In that case,
follow the procedure described below to move the
embroidery frame.
a
Touch
.
b
When the message to move the carriage appears, touch
.
The carriage automatically moves to a position
where the embroidery frame can easily be replaced.
c
After replacing the embroidery frame, touch
d
When the message displayed in step
.
The carriage returns to its original position.
Types of embroidery frames/Embroidery Frame
Holders and their applications
Embroidery frames that use Embroidery Frame Holder A
Embroidery frame
Extra-large embroidery
300 mm (W) × 200 mm (H)
frame
(approx. 11-3/4 inches (W) ×
7-7/8 inches (H))
Use when embroidering connecting
characters or patterns, combined
patterns or large patterns.
page 51
Flat frame (optional)
300 mm (W) × 200 mm (H)
(approx. 11-3/4 inches (W) ×
7-7/8 inches (H))
Use when embroidering jackets and
other thick garments.
When embroidering, install the optional
wide table onto the machine.
Contact your authorized Baby Lock
retailer.
Large embroidery
180 mm (W) × 130 mm (H)
frame (optional)
(approx. 7-1/8 inches (W) ×
5-1/8 inches (H))
Use when embroidering patterns with a
size less than 180 mm (W) × 130 mm
(H) (approx. 7-1/8 inches (W) × 5-1/8
inches (H)).
page 51
Medium embroidery
100 mm (W) × 100 mm (H)
frame
(approx. 4 inches (W)× 4
inches (H))
Use when embroidering standard-sized
patterns.
page 51
BASIC EMBROIDERY
.
b
appears, touch
Embroidering area
Usage
Reference page
55
2
Advertisement
Table of Contents
