e
Adjust the spacing of the repeated pattern.
• To widen spacing, touch
• To tighten spacing, touch
1
1 Touch
to change a repeated pattern back to one
single pattern.
Memo
• You can only adjust the spacing of patterns
included in the red frame.
Complete repeated patterns by repeating steps
f
e
through
.
After making the desired changes, touch
g
Memo
• When there are two or more patterns, all patterns
will be grouped together as one pattern in the red
frame.
• When changing the direction in which the pattern
will be repeated, all of the patterns in the red frame
will automatically be grouped as one repeating unit.
Repeating one element of a repeated pattern
.
.
a
c
b
.
c
d
By using the Cut function, you can select one element of a
repeated pattern and repeat only that single element. This
function allows you to design complex repeated patterns.
Choose the direction in which the repeated pattern will
be cut.
• Touch
to cut horizontally.
• Touch
to cut vertically.
The pattern direction indicator will change
depending on the direction selected.
Use
and
to select the cut line.
The cut line will move.
Touch
.
The repeated pattern will be divided into separate
elements.
Touch
.
BASIC EMBROIDERY
41
2