Baby Lock Capella Instruction And Reference Manual page 109

Error messages
10 OK to recall and resume previous memory?
11 OK to separate the combined border pattern?
12 Picker error
13 Press the unlock key to unlock the machine.
14 Preventive maintenance is recommended.
15 The pattern combination is too large for the extra
large embroidery frame. If you plan to add more
patterns, rotate the pattern combination.
16 The safety device has been activated. Is the thread
tangled? Is the needle bent?
17 This file cannot be used.
18 This pattern cannot be used since it exceeds the
data capacity.
19 This pattern cannot be used.
20 This pattern cannot combine.
21 Trimming sensor error.
22 USB media is not loaded. Load USB media.
23 Wiper error
Cause/solution
This message is displayed when the machine is turned off, then on again
before embroidering is completed. Touch
the embroidery screen was displayed before the machine was turned off,
back up several stitches, and then continue embroidering. (page 73)
This message is displayed when a combined border pattern is being rotated
in the embroidery screen.
This message is displayed when the thread picker (page 25) does not
operate correctly. Remove the thread entangled on the thread picker, and
then touch .
This message is displayed when the thread trimming button is pressed
before the machine is unlocked. Touch
trimming function.
This message is displayed when the machine needs maintenance. (page 99)
This message is displayed when a long vertical pattern is recalled and no
longer fits in the embroidery frame. Rotate the pattern 90 degrees.
This message is displayed when a malfunction occurred, such as the thread
becoming tangled or the needle is bent. The machine stops when it detects a
malfunction. Check that the machine is correctly threaded (page 64) and that
the needle is not bent.
This message is displayed when the file format is incompatible with this
machine. Check the list of compatible file formats. (page 109)
This message is displayed when the pattern being opened exceeds the
allowable number of stitches or data capacity, or when too many patterns
are being edited.
This message is displayed when you try to retrieve a pattern that was
downloaded for a different machine.
This message is displayed when a split (large-size) pattern is selected to be
combined with another embroidery pattern.
This message is displayed when lint or dust may have accumulated within
the moving knife, the fixed knife, the thread retaining plate, and their
surrounding areas. Clean them. (page 94)
This message is displayed when you tried to recall or save a pattern while no
USB media is loaded. Load USB media.
This message is displayed when you try to use incompatible USB media. For
a list of compatible USB media, visit www.babylock.com .
This message is displayed when thread is tangled on the wiper. Remove the
tangled thread.
This message is displayed when lint or dust may have accumulated within
the moving knife, the fixed knife, the thread retaining plate, and their
surrounding areas. Clean them. (page 94)
This message is displayed when the thread does not pass through the
groove in the thread cutter. Pass the thread through the groove securely.
APPENDIX
to resume embroidering. If
to use the thread
107
4