Husqvarna LG 504 Operator's Manual page 11

2. Turn the ignition key to the ignition position (B). The
indicators for battery charge and oil pressure come
on.
3. Turn the ignition key to the start position (C).
a) When the engine starts, immediately release
the ignition key. The ignition key goes back to
position (B).
b) If the engine does not start in 10 seconds,
release the ignition key and wait 5 seconds
before you try again.
4. Let the engine operate at idle speed for 2–3 minutes.
5. Push the throttle button (D) to full throttle.
D
To stop the product
1. Park the product on level ground.
1229 - 004 - 12.10.2022
B
C
2. Push the throttle button (A) to idle speed.
A
3. Let the engine operate at idle speed for 2–3 minutes.
4. If the engine has an electrical start, do also these
steps:
a) Turn the ignition key to the stop position (A).
b) Remove the ignition key to prevent accidental
start.
Compaction indicator (optional)
A B
• A: Yellow LED. The degree of compaction is 0–30%.
• B: Yellow LED. The degree of compaction is 30–
60%.
• C: Green LED. The degree of compaction is 60–
90%.
• C and D: Green and red LED. When these
LED indicators flash, the ground surface has the
maximum degree of compaction that is applicable for
the product.
• D: Red LED. The degree of compaction is 90–100%.
A
C D E
11