Table of Contents
Advertisement
1.
Push the control knob and select 1. Frequency Setup > 1.1 Guided Frequency Setup.
2.
Select Add Receiver to My System.
3.
To change the group, rotate the control knob to select G:, push to select, rotate to change the number, push again to
confirm.
4.
Select start scan.
5.
After the scan completes, push the control knob to apply the receiver channel.
6.
Turn on the transmitter you plan to use with this receiver.
7.
Align the infrared (IR) port on the transmitter with that on the receiver, and push the sync button.
8.
Once the sync is complete, the system is ready for use.
Manual Frequency Selection
To manually adjust group, channel or frequency:
1.
Select 1. Frequency Setup > 1.4 Manual Frequency Setup from the receiver menu.
2.
Use the control knob to select and adjust the group (G), channel (C), or frequency (MHz).
Shure Incorporated
22/43
Advertisement
Table of Contents
