Time Of Day Programming Mode Flow Chart - Pentair FLECK NXT2 Service Manual

TIME OF DAY PROGRAMMING MODE
FLOW CHART
Setting the Time of Day
NOTE: Set Time of Day on any unit and the rest of the units in
the system will update the Time of Day automatically.
1. Press and hold the Up button for 2 seconds.
The "Time" value is displayed. Press the Up or Down
buttons to adjust as desired.
2. Press the Extra Cycle button to advance to the "Year" field.
Press the Up or Down buttons to adjust as desired.
3. Press the Extra Cycle button to advance to the "Month"
field. Press the Up or Down buttons to adjust as desired.
4. Press the Extra Cycle button to advance to the "Calendar
Day" field. Press the Up or Down buttons to adjust as
desired.
5. Press the Extra Cycle button to return to the normal display
screen.
NOTE: Press and hold the Left button to exit without saving.
Example:
TIME
11:00AM 12 or 24 hour formats available
Example:
YEAR
2018 Set current year
Example:
MONTH
JAN Set current month
Example:
CALENDAR DAY
22 Set current day
END
12 • Pentair Fleck NXT2 Timer Pentair Fleck NXT2 Timer • 13