Setting The Time Of Day And Initiating A Manual Regeneration; Setting The Skipper Wheel; Forcing A Manual Regeneration - Pentair Fleck 3200 Series Owner's Manual

SETTING TIME OF DAY AND INITIATING A MANUAL REGENERATION
3200 Model
Setting the Time of Day
To set the time of day, push the red Time Set button and spin the 24-Hour Gear until the present time of day is
above the Time of Day Arrow.

Setting the Skipper Wheel

Set the days that regeneration is to occur by sliding tabs on the skipper wheel outward to expose trip fingers.
Each tab represents one day, and the red pointer on the skipper wheel points to the finger representing
tonight. Moving clockwise from the pointer, extend or retract fingers to obtain the desired regeneration
schedule.

Forcing a Manual Regeneration

To manually regenerate the valve, turn the manual regeneration knob clockwise until the valve motor starts to
turn.
4 • FLECK 3200 Series Electromechanical Timer Owner's Manual