Peak Hold - T Scale TW20 Series Operation Manual

TW20_NS20_EW20 Series Weighing Indicator Operation Manual
▪ FLOATING RANGE:1D/2D/5D/10D/20D/50D
▪ STABLE TIME: 5 SEC/10 SEC/ 20 SEC/ 30 SEC/
40 SEC/50 SEC
▪ JUMP RANGE:1D/2D/5D/10D/20D/50D
8 Press key to confirm you desired.
9 Press key three times to exit the setup menu and
enter animal weighing mode.
10 The Animal indicator will appear in the upper side of the
weight display.
11 Place item to be weighed on the scale platform. Once the stable indicator appears with a beep sound, the
final weight will be shown on the display.
The weight will be update when the load weight exceed the floating range and jump range.
To disable the animal weighing function, it's required to enter set up menu to change 4.WEIGHING MODE to
NORMAL setting .

5.16 Peak Hold

Operation:
1 Press key to enter setup menu.
2 Press key to select ADVANCED SETTINGS.
3 Press key to enter settings.
4 Press key until select 4. WEIGHING MODE sub
menu.
5 Press key to enter settings.
- 42 -
REV:01