Backlight Setting; Auto Power Off Setting; Peak Hold; Subtraction Scale - T Scale RWP Technical Manual

RWP Weighing Indicator Technical Manual(v1.16)
 Bring the load on to the platform.
 When the load few seconds get stable, the reading will be locked for few
seconds and will be follow beep.
 It can add or remove loads also update the weighing locked values.

5.12. Peak Hold

RWS can operate peak hold function, maximum reading will be hold and
will update automatically when adding the goods.
For this function, select parameter P4 CHk to ModE 4
In the normal weighing mode press
Peak hold operations, display will be indicate HOLD.
If want to turn off peak function, press

5.13. Backlight Setting

In the weighing mode. Press
parameter F3 OFF >BL.
OFF/BK ON), After select the back light option press
and press

5.14. Auto Power Off Setting

In the weighing mode. Press
parameter F3 OFF >SET OF , press
off time: 0/3/5/15/30. (of 0: always on, of xx: auto power off after
standby xx minutes), press

5.15subtraction scale

This is used for hopper scale, you need set auto zero range to 0 (see
detail in section 6 and set scale mode to mode 3
Turn on power, scale will show "err4", then show current total weight on
platform, press
hopper, display will show it's weight in "-" mode, press
will print out weighing ticket。
key and
press
key to escape from the settings.
key to sure, press
key , display show 0.00, then remove goods in
and key together to turn on
and key together again
key
key to select (BK AU/BK
key and key
key to change auto power
to select
key to confirm
to select
key to escape.
key, scale
- 15 -