Parameters - T Scale TW20 Series Operation Manual

TW20_NS20_EW20 Series Weighing Indicator Operation Manual

6. PARAMETERS

6.1 Enter into the Menu
Turn on the scale.Then come to the normal weighing mode

 Press
 Press numeric keys to enter the corresponding menu options
For example:
Press numeric key 1 to access basic settings in the main menu
Press numeric key 1 to access Device infor in the sub-menu
6.2 Keys in the parameter settings
To enter into the function and parameter settings
Escape from the parameter settings and return to the normal weighing mode
6.3 Active Parameter
Note:If want to change the settings for approval version: 2.Advance settings; 6.Service
Before enter the parameters,Press CAL switch to enable parameters to access. CAL switch is locating back side
of the indicator
TW20
key to enter menu parameters setting
- 44 -
REV:01