TW20_NS20_EW20 Series Weighing Indicator Operation Manual
5.7.4 Recall direct PLU
In normal weighing mode,press M key (selected from
5.8 Parts Counting
Weigh a sample to calculate the unit weight to determine the average weight of items to count, put a known
number of pieces on the scale . The balance of the total weight divided by the number of samples and displays
the unit weight.
Note:Before operation scale should be stable and return to zero, sampling available only when weight more than
20d .
5.8.1 Manual Sampling for counting procedure
5.8.1.1 Simple Sampling
Make sure platter empty and display return to zero.
Put a container on platter and press
Place a unknown amount of pieces on the scale.
Press
key to confirm when scale stable.
The digits in the sample window will be active.
If necessary press
key if necessary.
key to change the parts quantity (10/20/50/100).
- 25 -
to
)to recall direct PLU.
REV:01