Philips Click & Style YS534/17 User Manual page 16

replacement
replacing the shaving heads
For maximum shaving performance, we advise you to replace the shaving heads
every two years. Replace damaged shaving heads right away.
Only replace the shaving heads with original RQ32 Philips shaving heads. See also
chapter 'Ordering accessories'.
1 Follow steps 1-4 from chapter 'Cleaning and maintenance' under 'Cleaning
the shaving attachment'.
2 Remove the shaving heads and place new ones in the shaving unit.
Make sure the two wings of the shaving heads fit exactly into the recesses.
3 Place the retaining rings back onto the shaving unit (1). To reattach the
retaining rings, turn it against the direction of the arrows indicated in and
on the retaining ring (2) (Fig. 29).
Make sure the retaining rings are fixed properly. The four wings of the retaining ring
have to be located exactly under the recesses of the shaving head holder.
4 Reattach the shaving unit to the shaving attachment.
If the shaving unit cannot be reattached smoothly, check if you have positioned the
shaving heads properly and if the retaining rings are fixed properly.
replacing the body groomer foil
For a maximum grooming performance, we advise you to replace the body
groomer foil every year. Replace the foil with TT2000 Philips bodygroomer foil.
1 Pull the body groomer foil off the attachment (Fig. 30).
2 Place the new foil onto the attachment and snap it into place.
ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/service or go
to your Philips dealer. You can also contact the Philips Consumer Care Centre in
your country (see the worldwide guarantee leaflet for contact details).
The following accessories are available:
- RQ32 Philips shaving heads
- TT2000 Philips bodygroomer foil
- YS511 Philips beard styler attachment
- HQ110 Philips Shaving Head Cleaning Spray
For replacement combs, please also visit www.shop.philips.com/service.
EngliSh
15