Fitting The Hob Into The Worktop - Electrolux EHG9832X Instruction Booklet

22 electrolux

Fitting the hob into the worktop

Carry out the building in of the hob
as follows:
1. place the seals supplied with
the hob on the front edge of
the cut out. Then, place them
at 27 mm from the side
edges and at 10 mm from the
rear edge, as shown in the
diagram, taking care that the
seals
overlapping.
2. Place the hob in the cut out,
taking care that it is centred.
3. Fix the hob with the relevant
fixing clamps, supplied with
the injectors kit (see diagram).
When the screws have been
tightened, the excess seal can
be removed.
The edge of the hob forms a double
seal which prevents the ingress of
liquids.
meet without
27 27
Seal Seal Seal
Seal Seal