Download Print this page

Gas Connection - Electrolux EHG9832X Instruction Booklet

90cm gas hob with cast iron pan supports
Hide thumbs

Advertisement

On the end of the shaft, which includes the G 1/2" threaded elbow,
adjustment is fixed so that the washer is fitted between the components
as shown in the diagram. Screw the parts together without using excessive
force.

Gas Connection

Gas Connection
Gas Connection
Gas Connection
Gas Connection
Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e.
steel or copper.
The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread).
When the final connection has been made, it is essential that a thorough leak test
is carried out on the hob and installation.
Ensure that the main connection pipe does not exert any strain on the hob.
It is important to install the elbow corr
It is important to install the elbow corr
It is important to install the elbow corr
It is important to install the elbow correctly
It is important to install the elbow corr
the end of the thread, fitted to the hob connecting pipe.
the end of the thread, fitted to the hob connecting pipe.
the end of the thread, fitted to the hob connecting pipe.
the end of the thread, fitted to the hob connecting pipe.
the end of the thread, fitted to the hob connecting pipe.
Failure to ensure the correct assembly will cause leakage of gas.
Failure to ensure the correct assembly will cause leakage of gas.
Failure to ensure the correct assembly will cause leakage of gas.
Failure to ensure the correct assembly will cause leakage of gas.
Failure to ensure the correct assembly will cause leakage of gas.
FO 0264
A) End of shaft with nut
B) Washer
C) Elbow
FO 0814
ectly
ectly
ectly, with the shoulder on
ectly
, with the shoulder on
, with the shoulder on
, with the shoulder on
, with the shoulder on
electrolux 19

Advertisement

loading

  Related Manuals for Electrolux EHG9832X

This manual is also suitable for:

Ehg 9832