RM-362; RM-363
Baseband Troubleshooting Instructions
SIM related faults
Insert SIM card fault
Troubleshooting flow
The hardware of the SIM interface from UEMCLite (D2200) to the SIM connector (X2700) can be tested without
a SIM card. When the power is switched on the phone first check for a 1.8V SIM card and then a 3V SIM card.
The phone will try this four times, where after it will display "Insert SIM card".
Figure 15 Insert SIM card fault
Page 3 –16
COMPANY CONFIDENTIAL
Issue 1
Copyright © 2008 Nokia. All rights reserved.