Service Devices - Nokia RM-362 Service Manual

RM-362; RM-363
Service Devices and Service Concepts

Service devices

The table below gives a short overview of service devices that can be used for testing, error analysis, and
repair of product RM-362; RM-363. For the correct use of the service devices, and the best effort of workbench
setup, please refer to various concepts.
Issue 1
CA-106DS
The cable is used for connecting phone DC port to the flash prommer
FPS-10.
CA-111DS
The cable is used for connecting phone DC port to either POS flashing
device FLS-4S or to the PROMMER box FPS-11.
CA-112DS
The CA-112DS easy flash II cable is used for connecting phone DC port
to the PROMMER facilities (FLS-5, FPS-20).
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
Easy flash II cable
Easy flash II cable
Easy flash II cable
Page 2 –5