8-Loading The Pellets - MCZ SUITE-CLUB-MUSA Hydromatic 24 M1 Installation Manual

8-LOADING THE PELLETS

LOADING THE PELLETS
Fuel is loaded from the upper part of the stove by lifting the door. Pour the pellets into the hopper.
This is easier if performed in two steps:
Pour half of the contents into the hopper and wait for the fuel to settle on the bottom.
Then pour in the rest.
If loading pellets when the stove is running, open the door of the tank using the stove mitten that comes with the
stove itself.
When loading, do not let the pellet bag come into contact with hot surfaces.
Never remove the protection grid inside the hopper.
No other type of fuel other than pellets is to be inserted into the hopper, in compliance with above-mentioned
specifications.
Store the spare fuel at an adequate safe distance.
Do not pour pellets directly onto the brazier but only into the hopper.
When the appliance is running and when it is turned off, most of the stove surfaces are very hot (door, handle, glass,
smoke outlet pipes, etc.). Therefore it is recommended to avoid coming into contact with these parts.
46