Table of Contents
Advertisement
Oscilloscope Functions
Set Math
Click "MATH" in Channel menu to set MATH channel.
The MATH Setup window:
ON/OFF: Turn On/Off the MATH Channel.
Source A/B: Set the sources of the math channel.
Operate: Set operates type of the math channel.
Volt/DIV: Set the resolution of the math channel.
Probe: Set the math channel probe attenuation.
Invert: Turn on/off the invert function
The mathematic functions include addition, subtract, multiply, division and FFT.
Source A/B
Source A and Source B Menu
Operate
Four Types:
A + B
Add source A and source B
A - B
Subtract source B from source A
A x B
Multiply source A by source B
A / B
Divide source A by source B
FFT
Convert a time-domain signal into its frequency components (spectrum).
In this function, use the addition, subtraction, multiplication and FFT function to operate and
analyze the waveform.
Select the operate type in the Operate menu. Select source A and B. Then adjust the vertical scale
USER'S MANUAL
27
Advertisement
Table of Contents
