Table of Contents
Advertisement
When heating is complete, the message changes
to "Rinsing".
The appliance is ready for use when an espresso
coffee cup appears on the display.
tURnInG tHe APPLIAnCe oFF
Whenever the coffee machine is turned off after being used to
make coffee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water flows from the coffee spouts.
Avoid contact with splashes of water.
To turn the appliance off, press the
appliance performs a rinse cycle then goes off (stand-by).
Please note:
If you will not be using the appliance for some time, unplug
from the mains socket:
•
first turn the appliance off by pressing the
(fig. 5);
•
place the main switch in the 0 position (fig. 6).
Important!
never place the main switch in the 0 position while the
appliance is on.
MenU settInGs
To access the settings menu, press the MEnU icon. Scroll through
the menu by pressing the
To exit the menu, press the esC icon.
The following can be selected from the menu: Rinsing, Select
background, Descale, Install water filter, Set time, Auto-start,
Auto-off, Energy Saving, Set temperature, Water hardness, Beep,
Default values, Statistics, Set language.
Rinsing
Use this function to deliver hot water from the spout to heat the
internal circuit and make the coffee delivered hotter.
Press the oK icon to select the function. Press oK
again to confirm and start rinsing.
After rinsing, the appliance is automatically ready to make the
next drink.
Please note!
During rinsing, a little hot water comes out of the coffee spouts
and is collected in the drip tray underneath.
Avoid contact with splashes of water.
button (fig. 5). The
button
or
icon.
select background
Use this function to change the colour of the display
background.
Press the oK icon to select the function. Press the
or
then press oK again to confirm the choice.
Please note!
This menu item can be customised in all profiles (see
"Memorising your personal profile" on page 38).
Descale
For instructions on descaling, see page 40.
Install water filter
For instructions on the water filter, see page 42.
set time
To adjust the time on the display, proceed as follows:
Press the oK icon to select the function. Set the
hour using the
symbol to decrease, then press oK again to
confirm, then adjust the minutes. Finally press
oK to memorise the time set.
Please note!
Hold the
or
symbol down to run through the hours and
minutes quickly.
Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Please note!
For the appliance to come on at the set time, the time
•
must be set correctly.
•
To set the auto-start time, the hour must first have been
set.
Press the oK icon to select the function, then
press oK again to confirm.
Adjust the time as described in the previous
section and confirm with oK. The grey symbol
indicates that the function is not active.
Please note!
When the function is active, the
the current time.
32
icon to select the required background,
symbol to increase and the
symbol appears alongside
Advertisement
Table of Contents
Troubleshooting
