1. Manuals
  2. Brands
  3. Rivet King Manuals
  4. Rivet Tools
  5. RK-986
  6. Instruction manual

Rivet King RK-986 Instruction Manual

Pneumatic riveting tool
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
RK-986
TOOLS FOR BLIND RIVETS, STRUCTURAL
RIVET NUTS AND LOCKBOLTS
EN
PNEUMATIC RIVETING TOOL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RK-986 and is the answer not in the manual?

Questions and answers

Related Manuals for Rivet King RK-986

Summary of Contents for Rivet King RK-986

  • Page 1 INSTRUCTION MANUAL RK-986 TOOLS FOR BLIND RIVETS, STRUCTURAL RIVET NUTS AND LOCKBOLTS PNEUMATIC RIVETING TOOL...

  • Page 2: Table Of Contents

    • RIVETKING offers you training and qualified personnel. 2. DESCRIPTION Suitable clothing must be worn The RK-986 riveting machine is a tool designed to to avoid entanglement with the tool, protective goggles for the set structural rivets, collar bolts and Structural operator and bystanders, and rivets.

  • Page 3: Storage

    BRALO • Only kits supplied by RIVETKING should be 6. STORAGE used for the brand rivets. For the correct storage of the tool if it is not going • Disconnect the air supply before installing or to be used for a period of time, possible impacts, adjusting the kits.
  • Page 4 RK-986 COMPLETE KIT FOR BRALO STRUCTURAL RIVETS Ø 9.7 mm Nº REFERENCE DESCRIPTION RK986-2001 NOSEPIECE Ø9,7 STRUCTURAL RK986-2002 NOSEPIECE HOLDER RK986-2003 NOSEPIECE HOLDER NUT RK986-2004 JAW HOLDER JAWS Ø9,7 STRUCTURAL RK986-2005 RK986-2006 JAW PUSHER RK986-2007 PUSHER SPRING RK986-2008 DRIVER GUIDE To unscrew the 9.7 mm structural...
  • Page 5 BRALO COMPLETE KIT FOR COLLARBOLTS Ø 4,8 AND Ø 6,4 UNILOCK BRALOCK UNILOCK BRALOCK Nº DESCRIPTION Ø4,8 Ø4,8 Ø6,4 Ø6,4 1 HOLDER AND NOSEPIECE ASSEMBLY RK986-2023-1 RK986-2021-1 05BM3002024-1 05BM3002022-1 2 NOSEPIECE RK986-2023-2 RK986-2021-2 05BM3002024-2 05BM3002022-2 3 NOSEPIECE HOLDER RK986-2023-3 RK986-2021-3 RK986-2024-3 RK986-2022-3 4 JAW HOLDER...
  • Page 6 RK-986 BOM RIVET LOCKBOLTS COMPLETE KIT Ø 4,8 BOM RIVET Nº DESCRIPTION Ø4,8 NOSEPIECE RK986-2029-1 JAW HOLDER RK986-2029-2 JAWS SET RK986-2029-3 TRACKER RK986-2029-4 SPRING RK986-2029-5 SLEEVE RK986-2029-6 JAW HOLDER EXTENSION RK986-2029-7 8* NUT RK986-2033 9* SLEEVE RK986-2038 10* NOSEPIECE STOP...

  • Page 7: Air Supply And Pressure Regulator

    BRALO 10. AIR SUPPLY AND PRESSURE REGULATOR This machine is designed to operate with a compressed air supply. It is necessary to use an air pressure regulator, this ensures a long service life of the machine and reduces malfunctions to a minimum. Make sure that the compressed air supply is dry and clean, as moisture and impurities can cause malfunctions in the machine.

  • Page 8: Checks Before Using The Machine

    RK-986 12. CHECKS BEFORE USING • Squeeze the trigger. Make sure that the stem is ejected. THE MACHINE • Check if the machine has been damaged *The front castor wheels have a safety lock to during transport. prevent unwanted movement of the machine during use.
  • Page 9 BRALO 9) Remove the RECOVERY bleed screw (C) and 3) Press the trigger and at the same time, slightly washer (D) from the gun. loosen the TRACTION bleed screw (A) to release 10) Connect the machine to the air supply. Do the air bubbles keeping the trigger pressed, when not point the venting holes at the face of the no more air comes out, tighten the screw A.

  • Page 10: Assistance

    RK-986 17. ASSISTANCE - Transport. - Operator usage errors. To keep the tool in good condition, it is - Errors in maintenance work. recommended to service the tool and - Breakages or failures that are not attributed to replace worn parts on a regular basis.

Table of Contents