Advertisement
WARNING: When s ervicing, use only identical
Craftsman
replacement
parts. Use ofany other
part
m ay create a hazard or cause product
damage.
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from various
types of commercial solvents and may be damaged
by their use. Use clean cloths to remove dirt, dust, oil,
grease, etc.
_1, WARNING:
Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating
oils, etc. come in contact with plasticparts. They
contain chemicals that can damage, weaken or
destroy plastic.
Do not abuse power tools. Abusive practices can
damage tool as well as workpiece.
Only the parts shown on parts list, page 11, are
intended to be repaired or replaced by the customer.
AUother parts shouldbe replaced by a qualified
service technician at an authorized service facility.
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from various
types of commercial solvents and may be damaged
by their use. Use clean cloths to remove dirt, dust, oil,
grease, etc.
_1, WARNING:
Do not attempt to modifythis tool or
create accessories not recommended for use
with this tool. Any such alteration or modification
is misuse and could result in a hazardous
condition leading to possible serious personal
injury.
BATTERIES
Your screwdriver is equipped with 4 nickel-cadmium
rechargeable batteries. Length of service from each
charging will depend on the type of work you are
doing.
The batteries in this tool have been designed to
provide maximum trouble free life. However, like all
baftedes, they will eventually wear out. To remove
batteries, see page 11, Battery Removal. Handling of
these batteries, especially when wearing rings and
jewelry, could result in a serious burn.
To obtain the longest possible battery life, we suggest
the following:
•
Store and charge your batteries in a cool area.
Temperatures above normal room temperature
will shorten battery life.
•
Never store batteries in a discharged condition.
Recharge them immediate]y after they are dis-
charged.
•
All battedes gradually lose their charge. The
higher the temperature, the quicker they lose their
charge. If you store your tool for long periods of
time without using it, recharge the battedes every
month or two. This practice will prolong battery
life.
10
Advertisement
