en Appliance door
23.4 Fitting the door panes
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
▶
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
▶
Open the appliance door fully.
1.
Place the condensate trough vertically into the re-
2.
tainer
and turn it downwards.
3.
Slide the intermediate pane into the left- and right-
hand retainers .
Push the intermediate pane upwards until it is in the
4.
left- and right-hand retainers .
36
Open the appliance door and attach the door seal.
5.
Note: When sliding the pane in, ensure that the
6.
glossy side of the pane is on the outside and the
cut-outs on the left and right are at the top.
Slide the inner pane into the left- and right-hand re-
tainers .
Push the inner pane upwards until it is in the left-
7.
and right-hand retainers .
Put the door cover into position
8.
on it until you hear it click into place.
Open the appliance door fully.
9.
and push down