2 . The switch is defective;
3 . You smell or see smoke caused by scorched insulation
from the hot air gun .
BEFORE OPERATING
Before you switch on the hot air gun you have to search
for the right adapter for the mouthpiece and assemble it
on the mouthpiece if it is still cold .
Replace the mouthpiece only:
• with a stationary engine;
• when the appliance is disconnected;
• when the mouthpiece is cold .
OPERATION
Check if the mains switch is on position "0" before you con-
nect the apparatus;
Keep the power voltage always away from the hot air
stream and the mouthpiece .
If you want to get the best result, test all appliances on a
little part of the workpiece .
MAINTENANCE AND CLEANING
Make sure that the machine is not live when
carrying out maintenance work on the motor .
• Regularly clean the machine housing with a soft cloth,
preferably after each use . Keep the ventilation slots free
from dust and dirt .If the dirt does not come off use a soft
cloth moistened with soapy water . Never use solvents
such as petrol, alcohol, ammonia water, etc . These sol-
vents may damage the plastic parts .
• The machine requires no additional lubrication .
• Should a fault occur, e .g . after wear of a part, please con-
tact your local BORT GLOBAL LIMITED dealer .
DISPOSAL
Discarded electric appliances are recyclable and
should not be discarded in the domestic waste!
Please actively support us in conserving resources
and protecting the environment by returning this
appliance to the collection centres (if available) .
Made in China .
7