Safety Warnings - Bort BHG-1700 Manual

GB ENGLISH
HEAT GUN
Intended Use
The hot air gun can be used for:
• Plumbing work like tube connections, solder, bowing
tubes;
• Removing paint, varnish and lacquer without fire-risk;
• Quickly drying of appliances which have become wet;
• Drying surfaces for quick repairing;
• Removing self-adhesive labels in a clean way;
• Placing PVC labels;
• Blistering after sticking PVC materials can be smoothed
after heating;
• Easy removing of vinyl carpeting;
• Forming all synthetics with a low temperature among
which polyethylene and PVC;
• Forming all synthetics with a high temperature among
which acryl and plexiglass;
• Smelting synthetics, among which matters and foils
with PVC layer;
• Applying heat shrinking tubes;
• Shrink wrappers;
• Thawing tubes and engines;
• Repairing finishing layers: email of bath and household
appliances;
• Applying epoxy powder cover layers;
• Repairing of ski's, surf-boards and other sports goods;
• Unscrewing too fast fixed screws and connections .
TECHNICAL SPECIFICATIONS (FIG. 1)
Power consumption
Number of modes
Temperature 1
Temperature2
Air consumption 1
Air consumption 2
Cable length
Overheat protection
Voltage
Current frequency
Product weight
Product Life:
The service life of the product is 5 years .
Production date:
Is indicated on the packaging of the goods .
Shelf life:
Shelf life is not limited (subject to storage conditions) .
Storage conditions:
Products are stored in dry, ventilated warehouses at tem-
peratures from 0 ° C to +40 ° C with a relative humidity of
not more than 80% .
Transportation:
It is strongly prohibited dropping and any mechanical im-
pact on the packaging during transportation .
When unloading / loading, it is not allowed to use any
type of equipment that works on the principle of packing
clamping .

SAFETY WARNINGS

is a chance of fire risk . Watch out for the hot air stream
from the mouthpiece . This air stream can cause burns .
Before using the appliance:
Check the following:
- Make sure the voltage of the hot air gun corresponds
with the power voltage .
- Are the mains lead and the mains plug in a good state:
strong, without ravels or damages .
• Avoid the use of long extension cables .
• Do not use the appliance under moist circumstances .
• The metal mouthpiece gets hot . Watch out and do not
touch the metal mouthpiece .
• Prevent damage of the heating element . Do not lock or
block the mouthpiece .
2 000 W
• Do not leave the appliance when switched on .
2
• When the appliance is not in use, it can be put away on
the collapsible support, which is on the air gun . By col-
350 °С
lapsing this support, the air gun can easy be put away
600 °С
on it . The hot air gun now stands on the support with
the mouthpiece up .
300 L/min
• Do not use the appliance for drying hair or for drying
500 L/min
living human beings in general .
• Do not use the appliance in a bath, above water or in
2 m
spaces where easy inflammable liquids are used .
+
• If you are going to use the hot air gun, vapours and gas
can be liberated during a short time . This can be harmful
220 V
for your health . Asthmatics can suffer hindrance of it .
50 Hz
• Before connecting the plug to the mains voltage you
0,64 kg have to check if the switch is in position "0" .
• Keep the mains lead always away from the mouthpiece
of the hot air gun .
• Keep children and animals away from the appliance if
you are using it .
Immediately switch off the appliance when:
1 . Plug and/or cable are defective or damaged;
6
WARNING! This appliance operates at a tem-
perature of 350-600 degrees without visible
signs of this temperature (no flames); still there