LG FV141 H2BA Series Owner's Manual page 41

global_main.book.book Page 41 Thursday, April 13, 2023 9:41 AM
4
Press and hold the Dispenser 1 and Dispenser
2 buttons at the same time for 3 seconds to
save the changes.
Setting the Dispenser 2 for Different Liquid
Detergent Dispenser
1
Press the Power button.
2
Press and hold the Dispenser 1 and Dispenser
2 buttons at the same time for 3 seconds.
3
Press the Dispenser 2 button to light up the
Liquid detergent indicator.
4
Press and hold the Dispenser 1 and Dispenser
2 buttons at the same time for 3 seconds to
save the changes.
Cleaning the ezDispense pumping
system
Use this function to change the type of detergent
or softener. This function cleans residual detergent
or softener in the hose connected to the
ezDispense (when changing the type of
a
detergent or softener).
NOTE
• Run this function once a month (or more often if
needed) to remove detergent buildup and other
residue.
• If you do not clean the ezDispense
compartment, detergent or softener will be
remained in the connected hose.
• Using this function may cause some foam in the
drum.
1
Wash the ezDispense compartment that
needs to be cleaned. Please refer to Cleaning
the Appliance Periodically & Performing an
Emergency Water Evacuation in
MAINTENANCE chapter for further details.
2
Fill the water in compartment to be cleaned up
to the MAX line.
c
3
Press the Power button.
4
Press and hold the Spin button for 3 seconds to
clean the connected hose. When this option is
selected, appears on the display.
dcL
5
Press the Dispenser 1 or Dispenser 2 button
to select the compartment to be cleaned up.
• Both compartments can be cleaned at the
same time.
6
Press the Start/Pause button. Finishes this
function within 16 minutes.
Settings
Child Lock
Use this option to disable the controls. This
function can prevent children from changing cycles
or operating the appliance.
NOTE
• Once this function is set, all buttons are locked
except the Power button.
• When the controls are locked,
remaining time are alternatively shown on the
display during the wash while this function is
engaged.
OPERATION
41
and the
CL