LG FV141 H2BA Series Owner's Manual page 39

global_main.book.book Page 39 Thursday, April 13, 2023 9:41 AM
4
Press the Start/Pause button.
NOTE
• Except for LED of the Delay End button, all LEDs
on the control panel will be turned off within 20
minutes. This feature may vary depending on
the model purchased.
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, clothes
and other factors.
• To cancel the function, the Power button should
be pressed.
• Avoid using liquid detergent for this function.
Using the ezDispense
Use the Dispenser 1 and Dispenser 2 buttons to
set up and control the ezDispense function.
Dispenser 1 button
a
Dispenser 2 button
b
c Liquid detergent indicator
d Link indicator (Using only liquid detergent both
compartments)
Liquid fabric softener indicator
e
NOTE
• When the detergent or softener is insufficient;
- In case of pressing the Power button: The LED
will blink and the chime will sound.
- In case of running the appliance: The LED will
blink.
• The default settings are configured to dispense
the detergent of Dispenser 1 and the fabric
softener of Dispenser 2.
Changing Dispense Level for a Single
Load
1
Press the Power button.
2
Turn the knob to select the desired cycle.
3
Press the Dispenser 1 or Dispenser 2 button
to increase or decrease the dispensed amount
from the set defaults.
Buttons Indicator
*1 The default settings are configured to
dispense 42 ml of detergent and 30 ml of
softener for 4-6 kg of normally soiled
laundry.
4
Press the Start/Pause button.
OPERATION
39
*1
Dispensed Amount
More (110%)
Normal (100%)
Less (90%)
Off (0%)