LG FV141 H2BA Series Owner's Manual page 23

global_main.book.book Page 23 Thursday, April 13, 2023 9:41 AM
Customizing Washing Programme Buttons
e
Use these buttons to adjust the water temperature or spin speed settings for the selected
programme.
• The current settings are shown in the display.
• Press the button for that option to select other settings.
ezDispense Buttons
f
• Press the Dispenser 1 or Dispenser 2 to select ezDispense function.
• LED will light up to indicate the selected detergent type and amount.
• When the detergent or softener is insufficient;
- In case of pressing the Power button : The LED will blink and the chime will sound.
- In case of running the appliance : The LED will blink .
ezDispense Nozzle Clean
• Press and hold the Spin button for 3 seconds to use the ezDispense Nozzle Clean function.
Use this function to change the type of detergent or softener. This function cleans residual
detergent or softener in the hose connected to the ezDispense(when changing the type of
detergent or softener).
Display
g
• The display shows the settings, estimated remaining time, options, and status messages.
When the appliance is turned on, the default settings in the display will illuminate.
• While the load weight is sensed automatically, the display on the control panel blinks.
Time and Status Display
Programme Status Indicators
a
• When a washing programme is running, LED for the active stage will blink, and the LEDs for
the remaining stages will remain steady. Once a stage is complete, the LED will turn off. If a
cycle is paused, the active stage LED will stop blinking.
Description
Description
OPERATION
23