Related Manuals for Furniture of America CM-BK931-FF
Summary of Contents for Furniture of America CM-BK931-FF
- Page 1 For more information contact our team: service.ec@foagroup.com CM-BK931-FF Rev: 17-11-14...
- Page 4 Align left and right side frames (#1,2) to the holes of the bed frame (#3). Align washer (#A) to the outer holes of the side frames (#1,2), then secure by using bolts (#D). Do not fully tighten all bolts (#D).
- Page 5 Align left and right side frames (#1,2) to the holes of the bed frame (#3). Align washer (#A) to the outer holes of the side frames (#1,2), then secure by using bolts (#D). Do not fully tighten all bolts (#D). Prepare 4 bolts assembly by inserting washer (#C) onto bolts (#B).
- Page 6 Prepare 4 bolts assembly by inserting washer (#C) onto bolts (#B). Align upper guardrail (#4) to the holes of the side frames (#1,2). Secure by using bolts (#B) onto hex nut (#E) as shown in the diagram. Align support legs (#5) to the bottom bunk bed frame (#3), then secure by using bolts (#G) onto hex nut (#F) as shown in the diagram.
- Page 7 ASSEMBLY COMPLETED...
- Page 8 Safety Warnings 1.Follow the information on the warnings appearing on the upper bunk end structure and on the carton . Do not remove warning label from bed. 2.Always use the recommended size mattress or mattress support,or both,to help prevent the likelihood of entrapment or falls. 3.Surface of mattress must be at least 5 in(127mm).
Need help?
Do you have a question about the CM-BK931-FF and is the answer not in the manual?
Questions and answers