Table of Contents
Advertisement
Safety Information for Installation and
Operation
Topics:
Installation Requirements
l
RF Safety Distance
l
Cable Connections
l
Power Supply Information
l
Restricted Environments
l
Radio Approvals
l
Radio or Television Interference
l
Wireless Interoperability
l
Products with "UL 2043" printed on their product labels are within the limit specified in the "UL 2043 Standard for
Fire Test for Heat and Visible Smoke Release for Discrete Products Installed in Air-Handling Spaces" (Plenum).
Applies only when powered through PoE and plenum-rated cable assemblies. The PoE power supply is not
covered the by the UL 2043 evaluation of this Access Point.
NOTE:
Additional regulatory notifications and information for this product can be found online at:
https://www.sonicwall.com/support/technical-documentation.
SonicWave 681 complies with FCC U-NII New Rules.
Regulatory Model/Type
APL66‐106
Installation Requirements
WARNING:
The following conditions are required for proper installation:
1. Mount in a location away from direct sunlight and sources of heat. A maximum ambient temperature of
104° F (40° C) is recommended.
2. Route cables away from power lines, fluorescent lighting fixtures, and sources of noise such as radios,
transmitters, and broadband amplifiers.
3. Ensure that no water or excessive moisture can enter the unit.
4. Allow unrestricted airflow around the unit. A minimum of 1 inch (25.44mm) clearance is recommended.
5. Consideration must be given to the connection of the equipment to the supply circuit. Appropriate
consideration of equipment nameplate ratings must be used when addressing this concern. Do not
overload the circuit.
Product Name
SonicWave 681
SonicWave 681 Safety and Regulatory Reference Guide
SonicWall® SonicWave 681 Safety and Regulatory Information Guide
11
Advertisement
Table of Contents
