Set Up Android Tv - Philips NPX520/INT User Manual

Screen height adjustment
To adjust the screen height when placing
the projector on a flat surface, turn the angle
adjustment knob located at the bottom of the
projector.
Image shape adjustment
You can manually correct the keystone and
make the image rectangular.
V/H Keystone
You can manually make the image rectangular
by adjusting the horizontal and vertical
keystone angles.
1 Access the projector's settings menu by
pressing
on the projector. Then select Projector >
V/H Keystone.
2 Follow the on-screen instructions to adjust
the image shape.
Four Point Keystone
You can manually make the image rectangular
by moving four corners of the image.
1 Access the projector's settings menu by
pressing
on the projector. Then select Projector >
Four Point Keystone.
2 Follow the on-screen instructions to adjust
the image shape.

Set up Android TV

When you turn on the projector for the first
time or after the built-in Android TV Dongle
was reset to its factory default settings, Android
TV will start and prompt you to set it up by
making some basic settings.
After the setup, Android TV will sign in to
your Google account and connect to a Wi-Fi
network.
What you need
• A Wi-Fi internet connection
• A Google account
10
on the remote control or
on the remote control or
Step 1: Pair the remote control
with the projector
Follow the on-screen instructions to pair the
remote control with the projector.
After the pairing, the Welcome screen appears
and you can use this remote control to navigate
the on-screen user interface of Android TV and
initiate voice commands or search queries.
Tip: Press on the remote control to
switch to Android TV mode if the buttons on
the remote control are invalid for Android TV
navigation.
Step 2: Select the display
language
To select the display language for Android TV,
press the down or up navigation button on
the remote control to select your preferred
language and press the OK button to confirm.
Note: The default display language is English
(United States) and not all languages are
available.
Step 3: Set up your Android TV
There are 2 options to set up your Android TV:
• Quick Start with an Android phone
• Set up with the remote control
Set up with Quick Start
1 When your Android TV says, "Quickly set up
your TV with your Android phone?", use the
remote control to choose Continue.
2 Ensure your Android phone has the Google
app installed and is connected to a Wi-
Fi network.
3 On your phone, open the Google app
and sign in if you haven't already.
4 Type or say "set up my device."
5 Follow the instructions on your phone until
you get a code. Enter the code on your
Android TV.
6 On your phone, tap the name of your
Android TV when it shows up.
7 To finish setup, follow the instructions on
your Android TV screen.
Philips · NeoPix 520