Table of Contents
Advertisement
Connecting to an Android
Smartphone or Tablet via
MHL cable
Use the HML cable (available as accessory) to
connect the projector to your Android Smartphone
or Tablet.
Make sure that your Phone/Tablet is MHL
compatible (www.mhlconsortium.org)
1.
Switch the device on using the POWER
button.
2.
Connect the mini-HDMI plug of MHL cable to
the projector's mini-HDMI socket.
3.
Connect the MHL plug of MHL cable to the
playback device.
4.
From the main menu, select HDMI/MHL.
Notice
When MHL is working without AC power
supply, the USB power output will be
switched off.
16
Screen Mirroring – Connect
Phones or Tablets wirelessly
to share its contents
The screen mirroring feature allows you to mirror
your phone or tablet screen on to your projector
screen wirelessly to show content stored on your
handheld device.
Notice
PicoPix and your device must be
connected to the same WiFi network
Android
Make sure that your Phone/Tablet is
Miracast compatible. Please check on the
Wi-Fi Alliance-website:
(www.wi-fi.org/product-finder)
Open Quick Settings (swipe from top to
bottom) and activate ScreenMirroring
Windows
Make sure that your laptop runs at least
Win8.1 and is compatible with Miracast
hardware requirements
iOS
Screen mirroring can be accessed easily
on your iDevice in the Control Center
(swipe up from the bottom of screen) –
and select "EZCast"
1.
Switch the device on using the POWER
button.
2.
Select Screen Mirroring from the main menu
Advertisement
Table of Contents
