Removing The I/O Board; Prerequisites; Procedure - Dell Alienware 15 R4 Service Manual

Removing the I/O board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the
3 Follow the procedure from step 1 to step 3 in
4 Remove the
5 Remove the
6 Remove the

Procedure

1 Peel the tape that secures the I/O-board cable to the I/O board.
2 Open the latch and disconnect the I/O-board cable from the I/O board.
3 Remove the two screws (M2.5x5) that secure the I/O board to the palm-rest
assembly.
64
base cover.
wireless card.
solid-state drive.
rear-I/O cover.
computer base.
computer. After working inside your
After working inside your
"Removing the hard
computer.
drive".