Dell Alienware 15 R4 Service Manual page 130

Table 11. System setup options—Security menu
Security
Unlock Setup Status
Admin Password Status
System Password Status
HDD Password Status
Admin Password
System Password
HDD password
Password Change
Computrace
Firmware TPM
PPI Bypass for Clear Command
130
Displays if the setup status is
unlocked.
Displays if the administrator password
is clear or set.
Default: Not set
Displays if the system password is
clear or set.
Default: Not set
Displays if the HDD password is clear
or set.
Default: Not set
Enables you to set the administrator
password. The administrator password
controls access to the system setup
utility.
Enables you to set the system
password. The system password
controls access to the computer at
boot.
Enables you to set, change or delete
the hard-disk drive password.
Enables you to permit or deny system
password or HDD password changes.
Default: Permitted
Enable or disable the BIOS module
interface of the optional Computrace
Service from Absolute Software.
Default: Activate
Enables you to enable or disable the
firmware TPM function.
Default: Enabled
Enables you to control the TPM
Physical Presence Interface (PPI).