Operating The Controls; Air Control Knob; Water Control Knob; Soap/Chemical Control Knob - Craftsman 919.716171 Owner's Manual

Power sprayer wand
Table of Contents

Advertisement

Available languages

Available languages

AIR CONTROL KNOB

To turn "On": Push in the control
knob and turn clockwise towards the
"On" indicator.
To turn "Off": Push in the control
knob and turn counter-clockwise to
the "Off" indicator.
Air flow can be adjusted between the
"On" and "Off" positions.

WATER CONTROL KNOB

To turn "On": Push in the control
knob and turn counter-clockwise
towards the "On" indicator.
To turn "Off": Push in the control
knob and turn clockwise to the "Off"
indicator.
Water flow can be adjusted between
the "On" and "Off" positions.

OPERATING THE CONTROLS

Use moderate hand force when operating controls. Too
much force could result in breakage of the controls.

SOAP/CHEMICAL CONTROL KNOB

To turn "On": Turn the control knob
counter-clockwise. The knob can be
turned counterclockwise 2½ turns
only. More than 2½ turns may cause
erratic flow or stop soap/
chemical flow.
To turn "Off": Turn the knob
clockwise.
Soap/chemical flow can be varied by
adjusting the control knob. When
beginning to spray in the
soap/chemical mode, turn the knob
gradually until you achieve the flow
rate you desire.

FOLIAGE NOZZLE

To spray foliage, push the nozzle out
to get a light, mist spray. You can
control the mist pattern by pulling the
nozzle in slightly.
For washing and degreasing, pull the
nozzle all the way in towards the
handle.
6- ENG
D20059

Advertisement

Table of Contents
loading

Table of Contents