Status Window - Electrolux EDW7505HPS0A Use & Care Manual

Operating Instructions
8
Start/Cancel
To start a cycle, press the START touchpad once
and close the door. To cancel when a cycle is
running, open the door and press the CANCEL
touchpad once. Close the door again and the
dishwasher will drain and shut off.
NOTE
Opening the door during normal operation
will only pause the selected cycle.
Error Indications
In certain situations which are critical to the ma-
chine function and safe operation, the control shall
shut down and indicate an error code 'Er' (See Error
Codes on page 21). On units without a display, all
indicator lights will flash.
If one of these codes are displayed contact the
Electrolux Customer Care Center at
3287
. They will be able to provide assistance in
troubleshooting the problem and/or locating an
authorized service technician, if needed.
INTERIOR LIGHTS
When door is opened, interior lights illuminate
inside of dishwasher. These lights will turn off after
the door is closed or the door remains opened for
10 minutes.
BLUE LIGHT
When BLUE LIGHT luminates on the floor this
indicates that the wash cycle is complete.
CHIME
These models are equipped with a chime to audibly
indicate when you have pressed a cycle or
selected an option.

STATUS WINDOW

The STATUS window displays codes typically seen
during programming of the dishwasher. The window
will not display anything when the door is closed.
The STATUS window indicates the following activity:
1 HR-24HRS
Cd
SA
1-877-435-
CL
Indicates number of delay start
hours for selected cycle.
Displayed once the program has
been entered, the START/
CANCEL touchpad is pressed
and after a 10 second delay. It
also flashes if the door is
opened during a wash cycle,
after a 10 second delay. Close
the dishwasher door to begin or
continue a wash cycle.
Displayed when SANITIZE option
has been selected, dishwasher
has reached SANITIZE
temperature at completion of
wash cycle. SA will remain
displayed for 10 seconds.
Displayed when wash cycle has
been completed, SANITIZE has
not been selected or SANITIZE
temperature has not been
reached. CL will remain
displayed for 10 seconds.