Status Window - Electrolux EDW5500DSS0 Use & Care Manual

12
Operating Instructions

STATUS WINDOW

The STATUS window displays codes typically seen during normal operation or
programming of the dishwasher. The window will not display anything when the
door is closed. The STATUS window indicates the following activity:
1-24 Indicates number of delay start hours for selected cycle.
CL Flashes once the program has been entered and the START/CANCEL
pad is pressed. It also flashes if the door is opened during a wash cycle.
Close the dishwasher door to begin or continue a wash cycle.
HO Flashes to indicate a water heat delay.
PF Appears in window when dishwasher is first installed, or when power has
been interrupted. HI-TEMP WASH, SANITIZE and START/CANCEL
backlighting will also flash. To clear, touch START/CANCEL pad.
CF Appears in window when user must remove and clean filter. Once filter is
cleaned and replaced, dishwasher will continue normal operation. (See
Care and Cleaning, page 21.)
On Appears in window if chime is activated. Press the SHORT and RINSE
pads simultaneously to activate chime.
OF Appears in window if chime is deactivated. Press the SHORT and RINSE
pads simultaneously to deactivate chime.
LO Appears in window if rinse aid level is low. Add rinse aid. (See Rinse Aid,
page 19.)