Intended Use; Reasonably Foreseeable Misuse; Device Overview; Installation - GARANT 491495 160 User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 23
CAUTION
Damage to property due to improperly disconnecting the locked plug connection
Damage to the connection cable.
»
Pull on the plug, not on the cable.
CAUTION
Damage to property due to unsuitable routing of the connection cable
Adjusting the height of the workstation or other movable elements may result in mechanical strain and damage to the con-
nection cable.
»
Route the connection cable so that it will not be under any mechanical strain.
NOTICE
Uncovered magnifying glass
Fire risk when exposed to sunlight.
»
When not in use, cover the magnifying glass with the magnifying glass cover.
»
Avoid exposure to direct sunlight.
4.2.

INTENDED USE

Use a table clamp to mount the LED magnifying glass lamp securely on the installation surface.
4.3.

REASONABLY FORESEEABLE MISUSE

Not suitable for use by children.
Do not use in potentially explosive atmospheres.
Do not expose the work lamp to intense heat, direct sunlight or naked flames.
Never look directly into the light beam.
Do not operate outdoors or in rooms with high atmospheric humidity.
If damaged, do not use it.
Do not make any unauthorised changes or modifications.
Do not replace the integral LED lamps.
5.

Device overview

A
1 On/off button 2 Joint screw 3 Lamp support 4 Stud 5 Light segments 6 Lens
6.

Installation

6.1.

INSTALLING THE LAMP

B
Table clamp only for attachment to a sufficiently stable horizontal installation surface.
1. Attach the table clamp to the edge of the installation surface.
CAUTION! Risk of injury due to the lamp falling or toppling over.CAUTION!  Install the securing elements
properly.
2. Insert the plug [1] at the bottom of the jointed support into the opening in the table clamp [2].
»
Regularly check that it is securely seated.
6.2.

FITTING THE MAGNIFYING GLASS COVER

C
1. Press the magnifying glass cover together at the upper element.
2. Place the magnifying glass cover on to the magnifying glass from above, and release it.
»
The magnifying glass cover will now clip securely on to the lamp head.
6.3.

PARKING THE MAGNIFYING GLASS COVER

D
www.hoffmann-group.com
de
bg
da
en
fi
fr
it
hr
lt
nl
no
pl
pt
ro
sv
sk
sl
es
cs
hu
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

491497 160

Table of Contents