Storage Function - Beurer AS 50 Instructions For Use Manual

It is possible to switch off the pace measurement
of the activity sensor:
You are in the activity menu. The activity time is
displayed in the middle line and your number of
paces in the bottom line. Press the
button for approx. 3 sec. to switch off the pace
measurement. Pressing the button again for
approx. 3 sec. reactivates the pace measure-
ment ( ).
S
TORAGE FUNCTION
Your activity sensor has a storage function which stores your activity
data for up to 14 days. Your data is stored every day at 0:00 hours
and then reset to "0" on the display. From the 15th day, the oldest day
respectively is overwritten by the new day.
To be able to control your daily amount of exercise at best, we rec-
ommend transmitting your activity data to the EasyFit software with
the USB cable at the latest every 13 days. This guarantees that your
physical activity is optimally controlled in the long term.
Please note that when changing the battery, the stored data
of the current day is deleted in the EasyFit software. There-
fore, only change the battery in the morning to avoid data
overwriting.
26