Change Basic Settings - Beurer AS 50 Instructions For Use Manual

Pace counting on the activity sensor
As soon as you have run at least 10 paces in one go, the number of
paces and the activity time are updated on the display. These initial
paces are taken into account for pace counting.

Change basic settings

Set sensitivity and change basic functions
To achieve an optimum result, the sensitivity of the device should be
individually set for the user. Five sensitivity levels can be selected
here (1=Low sensitivity, 5=High sensitivity). The slower your running
speed, the higher sensitivity level you should select.
Recommended levels of the sensitivity you will find in the
description of the different wearing methods (see chapter
„Getting started").
3 sec.
You are in the activity menu.
Your activity sensor shows
.
play 1
Set sensitivity
is displayed.
SENSI
Set the sensitivity of the
device at first to Level 1. You can
test the sensitivity at a later date
in the menu flow and adapt it if
necessary (see below „Test sen-
sitivity").
Dis-
22