Attaching The Activity Sensor - Beurer AS 50 Instructions For Use Manual

Attaching the activity sensor

There are various possibilities to wear the activity sensor: on your
belt/trouser waistband (recommended wearing method), in your trou-
ser pocket or as a wristwatch.
Pay attention to adjust the sensitivity of the device differently
depending on how it is attached. We recommend wearing the
activity sensor on your belt to get the most accurate results of
the device as possible!
Only change between belt clip and wristband if necessary.
Changing too frequently wears out the material of the wristband.
Wearing the activity sensor on your belt/trouser waistband
You can attach your activity sensor to your belt or your trouser waist-
band with the supplied belt clip. To do this, put the activity sensor into
the belt clip as follows:
Display 3:
Middle line: Time of day
Back to
Display 1
.
19
G
B