Milesight VS133-P User Manual
  1. Manuals
  2. Brands
  3. Milesight Manuals
  4. Cash Counter
  5. VS133-P
  6. User manual
Milesight VS133-P User Manual

Milesight VS133-P User Manual

Ai tof people counting sensor
Hide thumbs Also See for VS133-P:
Table of Contents

Advertisement

Quick Links

Download this manual
AI ToF People Counting
Sensor
VS133-P
User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VS133-P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Milesight VS133-P

Summary of Contents for Milesight VS133-P

  • Page 1 AI ToF People Counting Sensor VS133-P User Guide...
  • Page 2 Use a soft, dry cloth to clean the lens of the device.  Declaration of Conformity VS133-P is in conformity with the essential requirements and other relevant provisions of the CE, FCC, and RoHS. Copyright © 2011-2023 Milesight. All rights reserved.
  • Page 3 Revision History Date Doc Version Description May 24, 2023 V 1.0 Initial version 1. Add staff lanyard accessory; 2. Add multi-device stitching feature; 3. Add installation height detection feature; 4. Add DHCP feature; Aug. 10, 2023 V 1.1 5. Display HTTP/MQTT connection status and support data re-transmission feature;...

  • Page 4: Table Of Contents

    Contents 1. Product Introduction ......................... 5 1.1 Overview ...........................5 1.2 Key Features ..........................5 2. Hardware Introduction ........................5 2.1 Packing List ..........................5 2.2 Hardware Overview ......................... 6 2.3 Reset Button ..........................6 2.4 Dimensions (mm) ........................7 3. Power Supply ............................. 7 4.

  • Page 5: Product Introduction

    The advanced ToF technology combined with an AI algorithm enables the sensor to handle complex scenes and distinguish non-human objects with up to 99.8% accuracy. With easy installation, VS133-P is ideal for entrances or corridors in retail stores, malls, offices, subways, and other locations.

  • Page 6: Hardware Overview

    1 × Multi-interface 1 × 1 × Cable Warranty Card Quick Guide 1 × VB01 Multifunctional 8 × Staff Lanyards Bracket Kit(Optional) (Optional) If any of the above items is missing or damaged, please contact your sales representative. 2.2 Hardware Overview 2.3 Reset Button Function Action...

  • Page 7: Dimensions (Mm)

     Powered by a PoE Injector 4. Access the Sensor VS133-P sensor provides user-friendly web GUI for configuration and users can access it via Ethernet port. The recommended browsers are Chrome and Microsoft Edge. The default IP of Ethernet port is 192.168.5.220 (can be found on the device label).
  • Page 8 Enter an IP address that in the same segment with sensor ( e.g. 192.168.5.61, but please note that this IP address shall not conflict with the IP address on the existing network); Step 3: Open the Browser and type 192.168.5.220 to access the web GUI. Step 4: Select the language.

  • Page 9: Operation Guide

    5. Operation Guide 5.1 Dashboard After logging on to the device web GUI successfully, user is allowed to view live video as follows.

  • Page 10: Rule

    Note: When working mode is Node mode, the device will not show people counting data. 5.2 Rule VS133-P supports 3 working modes: Standalone Mode: works as a standalone device to count people. Master Mode: works as a master device to receive live view and tracks from other node devices.

  • Page 11: Basic Counting Settings

    Node Mode: works as a node device to forward live view and tracks to the master device. 5.2.1 Basic Counting Settings Draw Detection Lines Users can draw detection lines to record the people count values which indicate the number of people enter or exit.
  • Page 12 2) Ensure that the detected target can pass through the detection line completely. It’s recommended that the detection line is perpendicular to the In/Out direction and on the center of the detection area without other objects around. 3) A redundant identification area needed to be left on both sides of the detection line for the target.
  • Page 13 is 1.6 m to 1.8 m, the Max. and Min. Target Height should be configured as 1.835 m and 1.565 m respectively. Counting Strategy Parameters Description When enabled, it allows to draw an area for every line and the device will count the In and Out values only when people passed this area.

  • Page 14: Multi-Device Stitching

    Parameters Description Trigger Report Report the people counting data immediately when the in/out value changes. Periodic Report Report the people counting data periodically. Set the period of reporting periodic report. Period Range: 1-1080 mins, default: 10 mins 5.2.2 Multi-Device Stitching Multi-device stitching is mainly used to monitor a larger detection area than just the area covered by a single device.
  • Page 15 Device Positioning Device positioning is done via X&Y coordinates. For example, the installation direction of the master device is shown as below. When the master device’s coordinate is (0, 0), the coordinates of the node devices are all positive values. Add Node Devices Step 1: Go to the master device web GUI, then click BindNode on Multi-Device List.
  • Page 16 Step 4: Select the node device on the Mult-Device List, click Adjust Relative Position. Drag the live view of node device to adjust the location and angle, and the relative position parameters will change automatically as your operations. Besides, users can also adjust the size of this live view.
  • Page 17 Step 6: When all settings are completed, users can draw detection lines and even U-turn areas on the new stitching live view the same as standalone mode devices. Step 7: Click Unbind to disconnect the node device if necessary. Node Mode...

  • Page 18: Communication

    Device the list of the master device. 5.3 Communication VS133-P provides a Ethernet port for wired access. Besides, users can get the people counting data or configure the device via CGI. For CGI document, please contact Milesight IoT support: iot.support@milesight.com.
  • Page 19 Parameters Description IP Assignment Manual or Automatic (DHCP) is optional. Set the IPv4 address of the Ethernet port, the default IP is IP Address 192.168.5.220. Subnet Netmask Set the Netmask for the Ethernet port. Default Gateway Set the gateway for the Ethernet port's IPv4 address. Primary DNS Server Set the primary IPv4 DNS server.
  • Page 20 Note: When working mode is the Node mode, the device will not support HTTP/MQTT settings. Parameters Description Protocol HTTP (post) or MQTT is optional. Show connection status from device to HTTP server or MQTT broker. Status Note: When it is being disconnected, the device will store up to 100,000 pieces of data and re-transmit them when the connection is back.

  • Page 21: Report

    5.4 Report VS133-P supports to generate visual line chart or bar chart to display the people traffic and supports to export the report. Before using this feature, ensure that the device time is correct on System page. Note: When working mode is Node mode, the device will not generate this report.

  • Page 22: User

    management. 5.5.2 User Parameters Description Click the admin on the user list, then you can click Modify to change the login Modify password of this device.

  • Page 23: Time Configuration

    Click to type administrator password, then set three security questions for your device. In case that you forget the password, you can click Forget Password button on login page to reset the password by answering three security questions correctly. Security Question 5.5.3 Time Configuration...

  • Page 24: Remote Management

    Set the interval to sync time with NTP server. Setting Time Set the device time manually. Synchronize with Synchronize the time with your computer. computer time 5.5.4 Remote Management Users can connect the device to the Milesight DeviceHub management platform on this page so...

  • Page 25: System Maintenance

    DeviceHub as to manage the device centrally and remotely. For more details, please refer to User Guide Before connecting, ensure the device has connected to network via Ethernet port and Internet connection is seamless. Parameters Description Status Show the connection status between the device and the DeviceHub. Server Address IP address or domain of the DeviceHub management server.

  • Page 26: Installation Instruction

    IR devices. When using Multi-Device Stitching, please avoid using Frequency the same mode with other node devices. Adjustment Note: if there is only one option, please contact Milesight IoT support: iot.support@milesight.com Recovery device basic configuration: keep the IP settings and user information when resetting. Reset Recovery device to factory settings: reset device to factory default, which needs to verify admin password.

  • Page 27: Installation Height

    Maximum pedestrian height Example 1.8 m Minimum pedestrian height Example 1.7 m α ToF horizontal field of view angle 98° β ToF vertical field of view angle 80° Length of detection range Width of detection range 6.1 Installation Height The maximum installation height is 3.5 m and the minimum installation height is h +d+Δd.

  • Page 28: Environment Requirements

    (Note: if the alarm I/O of VS133-P is going to be used, please connect a multi-interface cable to the device)
  • Page 29 Step 5: Remove the cover on the device, and then connect all required wires and pass them through the inside of pole. (Note: if the alarm I/O of VS133-P is going to be used, please connect a multi-interface cable to the device)
  • Page 30 Note: Tilt installation should be avoided. Ensure that the front of the device and the ground plane  are paralleled. Avoid installing the device against the wall and ensure that the device keeps away from the  wall at least 30 cm on the short side and 50 cm on the long side. Ensure that there are no other objects blocking the ToF light within a 30 cm radius of the ...

  • Page 31: Factors Affecting Accuracy

    Handheld or cart-carrying a humanoid doll with sufficient height to pass by: The doll will be  mistakenly detected as people because it is human-like in depth map. 7. Communication Protocol VS133-P will post the people counting data in json format to HTTP URL or MQTT broker.  Periodic Report "event":"People Counting", "report_type": "period", "device_info":{...
  • Page 32 "line":1, "in":10, "out":10, "staff_in":1, "staff_out":1, "children_in":1, "children_out":1 "line":2, "in":10, "out":10, "staff_in":1, "staff_out":1, "children_in":1, "children_out":1 "total_data":[ "line":1, "in_counted":10, //accumulated in counter "out_counted":10, //accumulated out counter "capacity_counted":0, //=in_counted-out_counted "staff_in_counted":1, "staff_out_counted":1, "children_in_counted":1, "children_out_counted":1 "line":2, "in_counted":10, "out_counted":10, "capacity_counted":0, "staff_in_counted":1, "staff_out_counted":1, "children_in_counted":1, "children_out_counted":1  Trigger Report "event":"People Counting", "report_type": "trigger", "device_info":{...
  • Page 33 "device_name":"People Counter", "device_sn":"369362028335", "device_mac":"00:16:28:FA:8E:68", "ip_address":"192.168.0.99" "cus_device_id":"123468773", //Customized device ID "cus_site_id":"asdfasf1231231" //Customized site ID "running_time": 1564648484648 //unit: s "time_info":{ “time_zone":"UTC-11:00 Samoa Standard Time (SST)", "enable_dst":false, //DST time is enabled or disabled "dst_status":false, //Whether DST takes effect "time":"2022-12-20T18:15:52+03:00", //Triggering time "trigger_data":[ "line":1, "in":1, //One person in "out":0,...

Table of Contents