Nuendo - Windows And Macos - Tascam US-428 Owner's Manual

8.3 Nuendo - Windows and
MacOS
The US-428 is fully supported under
Nuendo v1.xx for Windows and Mac,
including ASIO 16 and 24 bit drivers and
control surface mapping. We suggest
you make sure you've got the most
current update.
Before setting up the US-428 to work
with Nuendo, please install the US-428
v3.0 drivers. (Refer to the document on
installing the US-428 drivers with either
Win98SE/ME or Win2000.) Begin the
setup procedure below with the US-428
plugged in and power on. If you have
not already done so, install Nuendo.
Installing the US-428 under Nuendo:
Open the Nuendo application
From the D
EVICES
D S .
EVICE ETUP
Select the A /R
DD EMOVE
"T US-428" from the device menu
ASCAM
and click A . T
DD ASCAM
appear on the list of loaded devices on
the left side of the window.
Highlight US-428 and click the S
tab. Select US-428 C
MIDI I and MIDI O
NPUT
Highlight VST M
ULTITRACK
D pull-down menu, select ASIO
RIVER
US-428 (16- or 24-bit) driver.
Highlight D MIDI P
EFAULT
US-428 MIDI 1 or 2 from the I
O drop-down menus.
UTPUT
From the D menu, choose VST
EVICES
I . Make sure at least one pair of
NPUTS
inputs for the US-428 are set to active.
menu, choose
tab. Select
US-428 should
ETUP
for
ONTROL PORT
.
UTPUT
. In the ASIO
. Select
ORTS
and
NPUT
If you're running Nuendo for the first
time, you'll need to create a new project.
Select F /N P
ILE EW ROJECT
E P .
MPTY ROJECT
You'll then need to add tracks to the
project. Select the
T menu. This can be done one-
RACKS
at-a-time by choosing the type of track
( , MIDI or
AUDIO GROUP
M .
ULTIPLE
Once you've created Audio tracks, you
can open the VST Mixer (D
M , or press F1 on the US-428 or F3
IXER
on your computer keyboard).
should have control of Nuendo's faders,
mutes, transports
functions, as well as EQ and Aux sends.
The controller mapping for the US-428
within Nuendo largely follows the same
protocols as Cubase and Cubasis.
Refer to the US-428 manual for more
info on these functions.
Nuendo manual for more info on basic
operations of the program.
, and choose
P /A
ROJECT DD
), or by selecting
/VST
EVICES
You
and other basic
Refer to the
40