Targus PA075U User Manual page 7

PS/2 Port
To connect a PS/2 device, such as a mouse or keyboard,
plug it into a PS/2 port on the port replicator and begin
using the device.
Serial Port
Connecting and Configuring a Modem
To connect a serial modem:
1 Attach the cable connector to the serial port on the port
replicator.
2 Install the modem software driver according to the
instructions that come with the device.
3 When prompted to select the port, choose the Serial
USB (COMx), where x is the COM port number
assigned by your operating system.
Connecting a Handheld Computer
To connect a handheld computer:
1 Attach the cable connector to the serial port on the port
replicator.
2 Verify that the COM port setting, in either your
HotSync
on the port replicator. To verify the COM port setting on
the port replicator, refer to "Verifying Devices are
Installed" on page 11. To verify the COM port setting on
your handheld computer, refer to the documentation that
came with it.
®
or ActiveSync
®
software, matches the setting
7