Targus PA075U User Manual page 6

The port replicator supports hot swapping of the
network cable.
Connecting Devices to the Port
Replicator
When connecting new devices to the port replicator, you
may need to install additional software drivers. Consider the
following guidelines:
• The device drivers install automatically.
• When connecting a new device to the port replicator, you
must run the Setup or Install program for that device.
• When connecting a device to the port replicator, do not
force the cable connector into the port on the port
replicator, to avoid possible damage. If the cable
connector does not attach smoothly, turn the connector
over and try attaching it again.
AC PS/2
power keyboard
Parallel
PS/2 RS232
mouse Serial
Model PA095
RS232 Serial
Model PA075
6
Parallel
PS/2
Keyboard
RJ-45
ethernet
PS/2
Mouse