Targus PA088U User Manual

Usb to serial digital device adapter

Hide thumbs

page of 1

/ 1
Bookmarks

Quick Links

Download this manual

Introduction

Congratulations on your purchase of the Targus USB to Serial Digital Device Adapter. This ultra portable

expansion USB-RS232 directly connects to your computer via the Universal Serial Bus (USB) port. The

USB-RS232 features easy connectivity for traditional serial and others USB devices.

System Requirements

Hardware

• PC with a Pentium® processor or equivalent

• USB V.1.1 compliant port

• CD-ROM Drive

Operating System

• Windows® 2000 / XP / Vista™

Installing the Device and Driver

To use the Targus USB Port Adapter, you must first install its driver software onto your computer. Once the

driver has successfully installed, you will need to restart your computer. You can then connect your Targus

USB port adapter.

Card Reader

PDA

Labels Writer

Barcode Reader

Digital Camera

Fingerprint Verification

Technical Support

For technical questions, please visit

Internet: www.targus.com/support.asp | Telephone: 1-877-482-7487

Australia

Internet: www.targus.com/au | Telephone: 1800-641-645

New Zealand

Telephone: 0800-633-222

Product Registration

Targus recommends that you register your Targus accessory shortly after purchasing it. Go to: http://www.targus.com/registration.asp

You will need to provide your full name, email address, phone number and company information (if applicable).

Warranty

Targus warrants this product to be free from defects in materials and workmanship for one year. If your Targus accessory is found to be defective within that

time, we will promptly repair or replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no

conditions is Targus liable for loss of, or damage to a computer; nor loss of, or damage to, programs, records, or data; nor any consequential or incidental

damages, even if Targus has been informed of their possibility. This warranty does not affect your statutory rights.

Regulatory Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,

and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC Statement

Tested to Comply

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

• Reorient or relocate the receiving antenna;

• Increase the separation between the equipment and receiver;

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

• Consult the dealer or experienced radio/TV technician for help.

Changes or modifications not authorized by the party responsible for compliance could void the user's

authority to operate this product.

Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Features and specifications subject to change without notice. All trademarks and registered trademarks are the property of their respective owners.

USB to serial

digital device

adapter

WARNING

You must install the driver

software BEFORE

connecting the adapter to your

computer otherwise the adapter

will not work properly.

NOTE

When connecting a