EDIFIER W200BT Plus - Wireless Bluetooth Sports Headphones Manual

Functional operation instructions

• Power on/off / music playback
  
• Call
  
• Bluetooth pairing
  • When the headphones are powered off, press and hold the multifunctional button for around 5 seconds, the red and blue lights flash rapidly.
  • Search for and connect to "EDIFIER W200BT Plus", after pairing is successful, the blue light will flash slowly.
    Note: When the headphones are powered on and not connected, press and hold the multifunctional button for around 2 seconds to enter Bluetooth pairing.
• Clear pairing records
  When the earphones are powered on and not connected, press and hold the "+" and "-" buttons simultaneously for around 5 seconds, wait until the blue light flashes rapidly, then the pairing records have been cleared.
  Note: Images are for illustrative purposes only and may differ from the actual product.

NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.
Model: EDF200027

@Edifierglobal

@Edifier_Global

@Edifier_Global

Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
© 2021 Edifier International Limited. All rights reserved. Printed in China