Reference manual
Paper width
(Pagewid)
Head up Pagewid
Back
Next
1
2
3
4
Pagewid=136/10"*
Set
<
>
Exit
1
2
3
4
Select the Pagewid menu (3) (stands for page width).
Online
Setup
Setting options: From 20 to 136 in 1/10 inch steps
Default setting: 136/10 Zoll (136 characters at 10 characters/inch)
Online
This parameter determines the actual paper width. If Head up = On, the
Setup
printhead moves to the calculated centre of the paper during the time
the paper is moving in the protected zone. If Rightzo = On (see
below), the printhead moves out of the perforation zone on the right as
long as the paper is being transported.
Set the printing width rather than the actual paper width.
Confirm your settings with the Set key (1) and press the Next key (4) to
access the next group of parameters.
Mechanical adjustments to the printer
102