Tally T2040 Reference Manual page 22

Parameter group
Serial
Format
Protocol
Interf.
CG-Tab
CharSet
Country
BACK
Parameter
8 Bit No 1Stop *
7 Bit Even 2 Stop
Odd
Mark
Spc
XON/XOFF *
Robust XON/XOFF
ENQ/STX
ETX/ACK
Dual *
Parallel
Serial
Graphic *
DLL
Italic
Standard
Extended *
EPSON
E-US ASCII *
E-FRENCH
E-GERMAN
E-UK
E-DANISH I
E-SWEDISH
E-ITALIAN
E-SPANISH I
E-JAPANESE
E-NORWEGIAN
E-DANISH II
E-SPANISH II
E-L.AMERICAN
E-KOREAN
E-LEGAL
Description
The number of data bits, a parity bit and the number of
stop bits per data byte can be set.
The following settings are possible for the parity bit:
= Transmission without parity bit
NO
= Checking for even parity
EVEN
= Checking for odd parity
ODD
=Transmission of 1 (MARK) or 0 (SPACE)
MARK/SPACE
instead of the parity bit
Selection of the protocol type.
Selection of the interface. In Dual mode the printer auto-
matically changes between the parallel and the serial
interface (Shared mode).
Appears only if the Epson emulation has been selected.
Italic, graphics or DLL character sets can be selected.
Selects standard character set or extended character set.
Selects character sets.
If Font: OCR A/B DIN/ISO is selected for the
printer, only the following parameters appear:
– OCR A DIN
– OCR B DIN
– OCR A ISO
– OCR B ISO/ANSI
–
OCR A ANSI
** for the -needle version only
*** for the -needle version and Sans Serif, Roman,
Courier, Courier I only
Menu description table
-needle
1-15
?
QUIT