Setting Up Configurations - TallyGenicom LGe06 Operator's Manual

Repeat Step 1 and Step 2 until the print gap is set just right. This print gap con-
figuration can be saved and may be retrieved every time this particular paper is
loaded. What you have just set, though, will not change until someone goes
through Steps 1 & 2 again, or until a saved configuration with a different print
gap is loaded.

Setting Up Configurations

The 6300 Series printer can save up to ten personalized configurations, so you
don't have to recreate configurations you use frequently. Each configuration can
be given a label of up to 15 characters. When you first receive your printer, each
label is a generic "CONFIG" followed by a number 1 through 10. See page 3-71
for instructions on how to save configurations.
Operator Manual
2–34